TEN 40-2411WIE

DC/DC Converter TEN 40WIE Series, 40 Watt • Developed to maximize quality in a cost efficient design • • • Excellent temperature capabilities • Minimal heat development due to high efficiencies up to 93% 2” x 1” metal package (6-side shielded) Wide 4:1 input voltage range: 9-36, 18-75 VDC • Operating temperature range -40 to +85°C • • • 1600 VDC I/O-isolation • 3-year product warranty Remote On/Off and Trim function Protection against short circuit, overvoltage and overtemperature UL 62368-1 IEC 62368-1 The TEN 40WIE is rounding out Traco Power’s existing 40 Watt product range. Driven by current market trends this series was developed to maximize quality and cost efficiency in one product. Due to a new design approach the TEN 40WIE thus offers a cost efficient solution with not only no concession on quality or reliability but even improved specifications compared to its predecessor. It comes in a standard 2” x 1” metal package with a 4:1 input voltage range. High efficiencies of up to 93% allow for an operating temperature range (natural convection) of -40 to +70°C without power derating (model dependent). Certified according to the latest IT standard (IEC/EN/UL 62368-1) and equipped with additional features like remote on/off function and protection against short circuit, overvoltage and over temperature the TEN 40WIE series is suitable for many industrial applications. Models Order Code Input Voltage Range TEN 40-2410WIE TEN 40-2411WIE TEN 40-2412WIE TEN 40-2413WIE TEN 40-2415WIE TEN 40-2422WIE TEN 40-2423WIE TEN 40-2425WIE TEN 40-4810WIE TEN 40-4811WIE TEN 40-4812WIE TEN 40-4813WIE TEN 40-4815WIE TEN 40-4822WIE TEN 40-4823WIE TEN 40-4825WIE 9 - 36 VDC (24 VDC nom.) 18 - 75 VDC (48 VDC nom.) Output 1 Output 2 Vnom Imax 3.3 VDC 5 VDC 12 VDC 15 VDC 24 VDC +12 VDC +15 VDC +24 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 24 VDC +12 VDC +15 VDC +24 VDC 12'200 mA 8'000 mA 3'333 mA 2'666 mA 1'666 mA 1'666 mA 1'333 mA 833 mA 12'200 mA 8'000 mA 3'333 mA 2'666 mA 1'666 mA 1'666 mA 1'333 mA 833 mA Vnom Efficiency Imax –12 VDC –15 VDC –24 VDC 1'666 mA 1'333 mA 833 mA –12 VDC –15 VDC –24 VDC 1'666 mA 1'333 mA 833 mA typ. 90 % 92 % 92 % 93 % 91 % 91 % 91 % 91 % 90 % 91 % 92 % 92 % 92 % 91 % 91 % 92 % Options TEN-HS1 - Optional Heat Sink with Height = 0.22 inch: www.tracopower.com/products/ten-hs1.pdf TEN-HS8 - Optional Heat Sink with Height = 0.3 inch: www.tracopower.com/products/ten-hs8.pdf - Optional Heat Sink with Height = 0.8 inch: www.tracopower.com/products/ten-hs10.pdf on demand - Optional Heat Sink with Height = 0.5 inch: www.tracopower.com/products/ten-hs9.pdf (backorder with MOQ non stocking item) - Optional models with pre-assembled heatsink - Optional models with inverse Remote On/Off function (passive = off) www.tracopower.com September 20, 2023 Page 1 / 5 TEN 40WIE Series, 40 Watt Input Specifications Input Current - At no load 24 Vin models: 48 Vin models: 24 Vin models: 48 Vin models: 24 Vin models: 48 Vin models: 24 Vin models: 48 Vin models: Surge Voltage Under Voltage Lockout Recommended Input Fuse Input Filter 15 mA typ. 10 mA typ. 50 VDC max. (1 s max.) 100 VDC max. (1 s max.) 7 VDC min. / 8 VDC typ. / 8.8 VDC max. 15 VDC min. / 16 VDC typ. / 17.5 VDC max. 8'000 mA (fast acting) 4'000 mA (slow blow) (The need of an external fuse has to be assessed in the final application.) Internal Pi-Type Output Specifications Output Voltage Adjustment See application note: Voltage Set Accuracy Regulation - Input Variation (Vmin - Vmax) - Load Variation (0 - 100%) Ripple and Noise (20 MHz Bandwidth) - Cross Regulation (25% / 100% asym. load) - single output - dual output Capacitive Load - single output - dual output single output models: dual output models: single output models: dual output models: dual output models: 3.3 Vout models: 5 Vout models: 12 Vout models: 15 Vout models: 24 Vout models: 12 / -12 Vout models: 15 / -15 Vout models: 24 / -24 Vout models: 3.3 Vout models: 5 Vout models: 12 Vout models: 15 Vout models: 24 Vout models: 12 / -12 Vout models: 15 / -15 Vout models: 24 / -24 Vout models: Minimum Load Temperature Coefficient Start-up Time Short Circuit Protection Output Current Limitation Overvoltage Protection Transient Response - Response Time –10% to +20% (15 & 24 Vout models) ±10% (other models) (single output models only) (By external trim resistor) www.tracopower.com/overview/ten40wie Output power must not exceed rated power! ±1% max. 0.2% max. 0.2% max. 0.3% max. 0.5% max. (Output 1) 0.5% max. (Output 2) 5% max. 75 mVp-p typ. 75 mVp-p typ. 100 mVp-p typ. 100 mVp-p typ. 150 mVp-p typ. 100 / 100 mVp-p typ. 100 / 100 mVp-p typ. 150 / 150 mVp-p typ. 22'000 µF max. 12'000 µF max. 2'000 µF max. 1'300 µF max. 490 µF max. 980 / 980 µF max. 630 / 630 µF max. 250 / 250 µF max. Not required ±0.02 %/K max. 30 ms typ. / 60 ms max. Continuous, Automatic recovery 150% typ. of Iout max. 125% typ. of Vout nom. (By Zener diode) 250 µs typ. (25% Load Step) All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 2 / 5 TEN 40WIE Series, 40 Watt Safety Specifications Safety Standards EN 62368-1 IEC 62368-1 UL 62368-1 www.tracopower.com/overview/ten40wie PD 2 - IT / Multimedia Equipment - Certification Documents Pollution Degree EMC Specifications EMI Emissions - Conducted Emissions - Radiated Emissions EMS Immunity External filter proposal: Air: Contact: - Electrostatic Discharge - RF Electromagnetic Field - EFT (Burst) / Surge Ext. input component: - Conducted RF Disturbances - PF Magnetic Field Continuous: 1 s: EN 55032 class A (with external filter) EN 55032 class B (with external filter) EN 55032 class A (with external filter) EN 55032 class B (with external filter) www.tracopower.com/overview/ten40wie EN 61000-4-2, ±8 kV, perf. criteria A EN 61000-4-2, ±6 kV, perf. criteria A EN 61000-4-3, 10 V/m, perf. criteria A EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±2 kV, perf. criteria A 2 x KY 220 µF || SMDJ36A (12 Vin models) 2 x KY 220 µF || SMDJ58A (24 Vin models) 2 x KY 220 µF || SMDJ120A (48 Vin models) EN 61000-4-6, 10 Vrms, perf. criteria A EN 61000-4-8, 100 A/m, perf. criteria A EN 61000-4-8, 1000 A/m, perf. criteria A General Specifications Relative Humidity Temperature Ranges Power Derating Over Temperature Protection Switch Off Cooling System Remote Control 95% max. (non condensing) –40°C to +85°C +105°C max. –55°C to +125°C Depending on model See application note: www.tracopower.com/overview/ten40wie 115°C typ. (Automatic recovery) - Operating Temperature - Case Temperature - Storage Temperature - High Temperature - Protection Mode - Voltage Controlled Remote - Off Idle Input Current - Remote Pin Input Current Altitude During Operation Switching Frequency Insulation System Isolation Test Voltage Isolation Resistance Isolation Capacitance Reliability Washing Process - Input to Output, 60 s - Input to Case, 60 s - Output to Case, 60 s - Input to Output, 500 VDC - Input to Output, 100 kHz, 1 V - Calculated MTBF Natural convection (20 LFM) On: 3.0 to 12 VDC or open circuit Off: 0 to 1.2 VDC or short circuit Refers to 'Remote' and '-Vin' Pin 3 mA typ. -0.5 to 1.0 mA (Optional models with inverse Remote On/Off function (passive = off)) 2'000 m max. 225 - 275 kHz (PWM) 250 kHz typ. (PWM) Functional Insulation 1'600 VDC 1'600 VDC 1'600 VDC 1'000 MΩ min. 1'500 pF max. 1'245'000 h (MIL-HDBK-217F, ground benign) According to Cleaning Guideline www.tracopower.com/info/cleaning.pdf All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 3 / 5 TEN 40WIE Series, 40 Watt Environment - Vibration - Mechanical Shock - Thermal Shock MIL-STD-810F MIL-STD-810F MIL-STD-810F Copper Non-conductive FR4 (UL 94 V-0 rated) Silicone (UL 94 V-0 rated) Copper Nickel (2 - 3 µm) Tin (3 - 5 µm), matte Metal Case PCB Mount THD (Through-Hole Device) 2" x 1" Lead-Free Wave Soldering 260°C / 6 s max. 34 g - Case to Ambient 10.8 K/W typ. (without heatsink) 10.3 W/K typ. (with heatsink TEN-HS1) 9.3 W/K typ. (with heatsink TEN-HS8) 7.7 W/K typ. (with heatsink TEN-HS9) 6.2 W/K typ. (with heatsink TEN-HS10) www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf Exemptions: 7a, 7c-I (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule).) 066cb3a2-f918-4ca5-9d61-45dba6944ab5 Housing Material Base Material Potting Material Pin Material Pin Foundation Plating Pin Surface Plating Housing Type Mounting Type Connection Type Footprint Type Soldering Profile Weight Thermal Impedance Environmental Compliance - REACH Declaration - RoHS Declaration - SCIP Reference Number Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/ten40wie All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 4 / 5 TEN 40WIE Series, 40 Watt Outline Dimensions (0.1) Pinout 3 25.4 (1.0) 5 (0.8) Bottom View (0.4) 2 20.32 4 1 10.16 6 45.72 (1.8) Dimensions in mm (inch) Tolerances: x.x ±0.5 (±0.02) x.xx ±0.25 (±0.01) Pin dimension tolerance ±0.1 (±0.004) Pin Single Dual 1 +Vin (Vcc) +Vin (Vcc) –Vin (GND) –Vin (GND) 2 3 Remote On/Off Remote On/Off 4 +Vout +Vout 5 –Vout Common 6 Trim –Vout 10.2 (0.4) (0.22) 2.5 (0.1) 5.6 (0.3) 7.62 17.78 (0.7) 2.54 (2.0) (0.1) 2.54 50.8 Ø1.0 (Ø0.04) © Copyright 2023 Traco Electronic AG Specifications can be changed without notice. www.tracopower.com Rev. September 20, 2023 Page 5 / 5